• High performance
  • Simple, flexible operation with touch interface
  • Innovative sensors to aid in setup and to monitor processing
  • Minimal wire loss thanks to sensor monitoring
  • Simple integration of delivery and deposit equipment
  • TopWin interface
  • Networking in company network

The Kappa 330 belong to the latest generation of automatic cutting and stripping machines. This model is compelling in the extremely broad range of processing they cover. With the simple, flexible touch controls, even difficult to proce.

Function

This model is designed for processing cables with a cross section of up to 35mm², multicore conductors with an outside diameter of up to 16mm or flat cables with a width of up to 40mm. The customer has his choice of a belt drive or various double-roller drives depending on his requirements.

Sensors

The conductor diameter is automatically detected by a sensor using an inductive measuring approach. This feature greatly shortens setup and changeover and reduces operating errors. Laser and a CCD line optically measure the outside cable diameter and check that the cable is present during processing.

Periphery and interfaces

The integration of wire feeding systems, printers, active deposition units, etc. is standardized and easy. Special attention was paid to the integration and control of inkjet systems. Data backup, updates, import of CSV cable and product data are handled over a USB stick.
 

Software

TopTouch is an intuitive touch screen user software modeled on the TopWin structure found in automatic crimping machines. With the integrated user prompts, Kappas are extremely easy to operate.

TopWin Kappa expands the capabilities and functions of the fully automatic Kappa cutting and stripping machines. The PC-based control software allows inkjet marking, sequence production, and part list processing. The products to be produced may be loaded directly to the wire processing machine or via a job list.

The optional interface WPCS (Wire Processing Communication Stand-ard) allows Komax machines to be networked under TopWin. With this open interface, the machine is easy to integrate into existing production sequences.

TopNet is a clearly arranged mana-gement software with functions for the centralized creation and management of parts, articles and jobs that help you to optimize your production operations.

TopConvert can be used to convert already existing job and article lists to WPCS format. These data may then be processed directly by the cutting and stripping machine.

Accessories/options

The Komax Kappa line can be customized with various accessories to meet specific customer needs.

Feed systems

  • Komax 104 passive dereeler
  • Wire feed systems
  • ads 115, ads 119 and ads 123

Preliminary processing of wires

  • Komax 26 hot stamp marker
  • Komax 62 notching and slitting machine
  • CSU intermediate stripping module
  • ims 295 inkjet (BC/MC/BS)

Deposit systems

  • dps 272 dual drum coiler
  • KRI 800 wire coiler
  • dps 261 Binder
  • dps 375 wire deposit system
  • KA 3000 wire deposit system
  • KA 6000 wire deposit system

Services

Komax offer to you an optimal support by individual Service offers.

  • After-Sales Service
  • Production Assistance
  • Certified Training Courses
  • Feasibility Test

Cable cross section, stranded wires*
0.22–35mm²
AWG24–AWG2 max. outside diameter
16mm (0.63in.)Cable length range1mm–700000mm (0.039in.–765.53yd.)max. wire transport speed4.0m/s (157.5in./s)Quantity range (pcs)1–99999 max. stripping lengthsFull strip
Side 1: 180mm (7.09in.)
Side 2: 50mm (1.97in.)
Partial strip
Side 1: 999.9mm (39.37in.)
Side 2: 999.9mm (39.37in.)Intermediate strippingQuantity × max. length
Programmable (no restrictions on quantity and length)Cable monitoring (Cable detector)OptionalAutomatic cross-section detection
(Conductor detector)
OptionalNoise level<70dBADrive systemDouble roller drive or belt driveProduction tableOptionalElectrical connection110/230VAC ±10% 50/60Hz 520VAPneumatic connection5-8bar (73-116psi)Dimensions (W×H×D)630×365×480mm (24.8×14.8×18.9in.)WeightApprox. 55kg (157.4lb)

*The Kappa generations can process many conductors outside the indicated cross section range. Certain extremely hard, tough wires may not be able to be processed even if they are within the indicated cross section range. In case of doubt, we are happy to produce samples of your wires.

Cutting
Cut Pulled Strands
Full Strip
Half Strip
Precision Cut
Multiple Strip
Flat Cable / Notching
Double Sheath Cable
Intermediate Strip
Hot Stamp Marking
Inkjet Marking
Sequence