Products
- Spare Part
- Wire Cutting
- Wire Stripper
- Cable Stripping Laser
- Cut And Strip
- Crimp To Crimp
- Wire Crimper
- Bench Top
- Wire Crimping Applicators
- Wire Crimper - Ferrule
- Wire Stripping Crimping - Ferrule
- Wire Twister
- Marking Systems
- Cable Marking Laser
- Wire Feeding
- Wire Deposit
- Taping
- Cable Harness Production Panels
- Test Systems
- Ultrasonic Welding Systems
- Heat Shrinking
- Professional Hand Tools
- Accessories
- Direnç Kaynağı
Article number: ACT 1000 N
IMADA Automatic Crimp Tester ACT-1000N
Automatic Crimp TesterAutomatic Crimp Tester ACT-1000N
- The start button provides smooth flow from Testing to Data saving including OK/NG judgment.
- Save the test conditions up to 26 patterns. The suitable setting is able to be recalled instantly.
- 2 test modes are available “BREAK mode” and “KEEP mode”.
- It can partly measure the test in accordance with standards JISC2805 and UL 486A-486B.
Capacity 1000N
Resolution 1N
Accuracy +/-0.5% F.S +/-1digit
Unit N, kgf ,lbf (*1)
Sampling rate 2000Hz
Safe overload rating Approx. 150% F.S.
Overload warning 110% or less
Measuring speed 10/25/50/100 mm/min (Choose from 4 steps)
Stroke Approx.50mm
Allowable sample diameter Terminal side: 1~8mm (*2) Harness side: 1~8mm (*2)
Allowable sample length 100mm or more
Mode BREAK/KEEP mode
Number of registered test 26 patterns(A~Z)
condition
Output USB/RS232C/pass or fail decision signal (OK/NG)
Security lock Emergency stop button and Overload prevention (at the power on)
Power supply AC100~240V
Weight Approx.11kg
Size W400*D240*H150
Operating environment Temperature :0~40 degree Celsius Humidity:20~80%RH
Approved standard -JIS C2805(2010) “Crimp-type terminal lugs for copper conductors.”
-UL 486A-486B(2013) “ Standard for Safety for Wire Connectors, 9.3.4 Pullout test”
Accessory Software, USB cable, Power cord, Inspection Certificate
